Corrosion Control of Coated Structural Components in Marine Environment

G L Manjunath

Department of Ocean Engineering, Indian Institute of Technology Madras, Chennai, India

S Surendran

Department of Ocean Engineering, Indian Institute of Technology Madras, Chennai, India

DOI: https://doi.org/10.36956/sms.v1i1.3

Copyright © 2019 G L Manjunath, S Surendran. Published by Nan Yang Academy of Sciences Pte. Ltd.

Creative Commons LicenseThis is an open access article under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License.


Abstract

Tropical waters are with more salinity and harbor millions of micro organisms. Such environmental condition challenges the strength and reliability of marine structures. The behaviour of structural materials due to pitting and uniform corrosion is studied, and a method based on coating is suggested to improve the life cycle ensuring reliability in its functionality. The structural materials like high strength steel and AA6063 were selected for the study and metallic coating performed for evaluation of corrosion resistances. Samples are investigated in chloride concentration of 3.5% NaCl by weight loss measurements and potentiodynamic polarization. The coating was done by electroplating and PVD (Physical Vapour Deposition) method for high strength steel, where as aluminum samples were coated by an electroplating method. The high strength steel samples were mono coated by Ni and Cr using the electroplating method, and composite coating was done with Al-N (Aluminium nitride) and Ti-Al-N (Titanium Aluminium Nitride) by PVD techniques. Scanning electron microscopy (SEM) was used for evaluation of fracture toughness of coating around the pits formed. The investigation showed that the methods and thickness of coating influenced corrosion resistances of the substrate metals. Composite coated samples by PVD showed excellent corrosion resistance properties compared to electroplated samples after the investigations. Finite element analysis was performed by FRANC 2D/L (Fracture Analysis Code) showed a decrease in stress intensity values for composite coated samples of PVD compared to mono coated electroplated samples. Increase in the duty cycle of the structure was observed in the simulation has a result of a decrease in stress intensity values for PVD coated samples.

Keywords: aluminum, metal coatings, steel, SEM, weight loss, pitting corrosion


References

[1] P. V. Petroyiannis, Al. Th. Kermanidis, P. Papanikos, Sp. G. Pantelakis, Corrosion-induced hydrogen embrittlement of 2024 and 6013 aluminum alloys, Theoretical and Applied Fracture Mechanics 41 (2004) 173–183.

[2] Sp. G. Pantelakis, P. G. Maglaras, Ch. Alk. Apostolopoulos, Tensile and energy density properties of 2024, 6013, 8090 and 2091 aircraft aluminum alloy after corrosion exposure, Theoretical and Applied Fracture Mechanics 33 (2000) 117-134.

[3] D. Birchon, The use and abuse of materials in ocean engineering, Proceedings of the Institution of Mechanical Engineers 24 (1970) 185.

[4] D. G. Harlow and R. P. Wei, A probability model for the growth of corrosion pits in aluminum alloy induced by constituent particles, Engineering Fracture Mechanics Vol. 59 (1998) 305-325.

[5] M Ramana Pidaparti, S. Appajoysula Rao, Analysis of pits induced stresses due to metal corrosion, Corrosion Science 50 (2008) 1932–1938.

[6] T. G. Gooch and G. S. Booth, Corrosion fatigue of offshore structures, Metal Science (1979) 402-410.

[7] S. P. Lynch, Failures of structures and components by environmentally assisted cracking, Engineering Failure Analysis Vol 1, No. 2 (1994) 77-90.

[8] Torgeir Moan, Efren Ayala-Uraga, Reliability-based assessment of deteriorating ship structures operating in multiple sea loading climates, Reliability Engineering and System Safety 93 (2008) 433 – 446.

[9] Franc2d Users manual. URL: https://cfg.cornell.edu/

[10] A. Dale Cope, S. Patrick Johnson, Angela Trego, and J. Doug West, Analytical framework for the assessment of corrosion and fatigue in fuselage lap joint, (1998) Boeing Information, Space and Defence systems, Wichita, Kansas 627277 USA.

[11] P. Richard Gangloff. Environmental cracking - corrosion fatigue. URL: https://www.researchgate.net/publication/252202278_Environmental_Cracking-_Corrosion_Fatigue

[12] Domenico “Nico” Quaranta, FRANC2D/L crack growth users guide, (2011). Revision 1.5.5.

[13] ASTM G-59 standard test method for conducting potentiodynamic polarization resistance measurements.

[14] ASTM G-31 Standard Practice for laboratory immersion corrosion testing of metals.

[15] J. Lesage, A. Roman, and D. Chicot. Indentation tests determine the fracture toughness of nickel-phosphorus coatings. Surface and Coatings Technology 5 (2002) 161-168.

[16] B. Zaid, D. Saidi, A. Benzaid, S. Hadji. Effects of pH and chloride concentration on pitting corrosion of AA6061aluminum alloy. Corrosion Science 50 (2008) 1841–1847.

[17] Hiroki Tamura, The role of rusts in corrosion and corrosion protection of iron and steel, Corrosion Science 50 (2008) 1872–1883.

[18] Ramana M. Pidaparti, Babak Seyed Aghazadeh, Angela Whitfield, A. S. Rao and Gerald P. Mercier. Classification of corrosion defects in Ni-Al bronze through image analysis. Corrosion Science 52 (2010) 3661-3666.

[19] Allachi. H, Chaouket. F, Draoui. K. Protection against corrosion in marine environments of AA6060 aluminum alloy by cerium chlorides. Journal of Alloys and Compounds 491 (2010) 223–229.

[20] Park Y I. Time-dependent risk assessment of aging ships. A Doctoral thesis submitted to Pusan State University on February 2004.

[21] Paik J K and Kim D K. Advanced method for the development of an empirical model to predict time-dependent corrosion wastage. Corrosion Science, Volume 63, October 2012, Pages 51–58.

[22] Mohd Hairil Mohd, Do Kyun Kim, Dong Woo Kim, and Jeom Kee Paik. A time-variant corrosion wastage model for subsea gas pipelines. Available online from 18 March 2013.

[23] Manjunath G L and Surendran S. Effect of mono and composite coating on dynamic fracture toughness of metals at different temperatures. Composite Part B. Accepted on 11/03/2013.