Email this article Structural Integrity Analysis of Containers Lost at Sea Using Finite Element Method
Article ID: 505
Abstract
Unlike traditional transportation, container transportation is a relatively new logistics transportation mode. Shipping containers lost at sea have raised safety concerns. In this study, finite element analysis of containers subjected to hydrostatic pressure, using commercial software ANSYS APDL was performed. A computer model that can reasonably predict the state of an ISO cargo shipping container was developed. The von Mises stress distribution of the container was determined and the yield strength
was adopted as the failure criterion. Numerical investigations showed that the conventional ship container cannot withstand hydrostatic pressure in deep water conditions. A strengthened container option was considered for the container to retain its structural integrity in water conditions.
Keywords
Full Text:
PDFReferences
Lee, C.Y., Song, D.P., 2017. Ocean container transport in global supply chains: Overview and research opportunities. Transportation Research Part B: Methodological. 95, 442-474.
The International Institute of Marine Surveying (IIMS), 2020. World Shipping Council containers
lost at sea 2020 report issued and shows a decrease. [online] Available at:
world-shipping-council-containers-lost-at-sea-2020-report-issued-and-shows-a-decrease/> (Accessed 29 December 2021).
Allianz, 2021. Safety and Shipping Review. An annual review of trends and developments in shipping losses and safety.
Zha, X., Zuo, Y., 2016. Theoretical and experimental studies on in-plane stiffness of integrated container structure. Advances in Mechanical Engineering. 8(3), 1687814016637522.
CSC, 1996. International convention for safe containers.
Giriunas, K., Sezen, H., Dupaix, R.B., 2012. Evaluation, modeling, and analysis of shipping container building structures. Engineering Structures. 43, 48-57.
Antoniou, K., Oterkus, E., 2019. Origami influence on container design. Annals of Limnology and
Oceanography. 4(1), 015-019.
Timoshenko, S.P., Goodier, J.N., 1951. Theory of elasticity.
ASTM International, 2013. ASTM A283/A283M-13-Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates.
Akkaş, N., 2017. Welding time effect on tensile-shear loading in resistance spot welding of SPA-H weathering steel sheets used in railway vehicles. Acta Physica Polonica A. 131(1), 52-54.
Zarzour, J.F., Konkol, P.J., Dong, H., 1996. Stressstrain characteristics of the heat-affected zone in an HY-100 weldment as determined by microindentation testing. Materials characterization. 37(4), 195- 209.
DOI: http://dx.doi.org/10.36956/sms.v4i2.505
Refbacks
- There are currently no refbacks.
Copyright © 2022 Selda Oterkus, Bingquan Wang, Erkan Oterkus, Yakubu Kasimu Galadima, Margot Cocard, Stefanos Stefanos, Jami Buckley, Callum McCullough, Dhrubajyoti Boruah, Bob Gilchrist
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
